Remove the toner sensor mounting screw A. Information on whether your vinyl label converter has passed Lexmark criteria is available at the Lexmark Web site www. Remove the upper front cover. Send your job to the printer. A print job containing a single page increments the maintenance. Setting parameters in the printer Press on the operator panel.
This requires removing the staple cartridge holder from the printer. Send your job to the printer. Loosen, but do not remove, the six screws on the shield. Remove the functional rubber sheet A and the rubber dome sheet B. Ordering pick rollers Order Lexmark part number 40X0070. Model Name The model name can only be viewed and cannot be changed.
To per inch lpi setting is not set too high in the software application. Push the release latch, and open the top front cover. Accessing service menus and operations used while manufacturing and servicing the printer. From the printer operator panel, set the Paper Type and Paper Size according to the media you loaded. Remove the fuser narrow media sensor. If incorrect, replace the high-capacity feeder option control board.
They can help isolate the problem. Firmly pull the colored tab to remove the staple cartridge holder from the stapler. Open the printer paper tray, and remove any jammed media. Paper feed problems-base printer or integrated 500-sheet of copy. For more information about these options, see the driver Help. These envelopes may severely damage the printer.
Remove the system board and inner shield. Open the multipurpose tray to a position that allows the left and right tray hinge slots A to align with the D-shape mounting posts B. Connect the fuser narrow media cable. Action Service errors 980 thru 984 can 00 991. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. Printer does not recognize the envelope feeder as an sensor assembly.
With a thumbnail, release the catches B holding the sensor cover to the lower exit guide Hold the narrow media flag out of the way to remove the sensor from the cover. Disconnect the paper size sensing board cable B from the board. Lexmark is not responsible for the use of other replacement parts. Information on whether your vinyl label converter has passed the Lexmark's criteria is available at www. Replace the entire unit when service is required. Changes are periodically made to the information herein; these changes will be incorporated in later editions.
Part or all of the page is printed in black. Remove the screw A holding the latch and spring to the upper front cover. Touch something metal such as the printer frame before you touch a memory card. If correct, replace the system board. Envelope Enhance This setting affects the level of the fuser solenoid.
This counter is reset by the servicer after a 80 Scheduled Maintenance message displays and a maintenance kit is installed. Align and reinstall the toner cartridge. If this product is a feature or option, this statement applies only when that feature or option is used with the product for which it was designed. Adjust the fuser solenoid while installed in the printer. Release the redrive assembly mounting latches B , and remove the redrive assembly.