To edit the Program Title and Category, skip to step 6. Details are on page 12. You may set up the Controller later by following the instructions on pages 50-54. The blank space length is displayed with the current selected tape speed. Details are on pages 38-45.
Setting clock manually — Manual Clock Set First follow steps 1 to 2 on page 10, then go to the following steps. For more information, please see page 19. Retain this information for future reference. Details are on pages 6-9. We have tried utmost care to make sure completeness of manual. The screen will be blue and the sound will be muted. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
SmartPicture and ShowGuard are trademarks of Marantz America, Inc. Likewise, if you play a tape that is a recording of a copyright protected program, the picture may not be clear. The tape preview screen will appear. Use the Remote to do the following operations. But improper use can result in potential electrical shock or fire hazards. Details are on pages 27-28.
Reset the clock if necessary. The day of the week will appear automatically. Use Time Zone Selection to set your clock. Remember, the clock must be set before you can program the timer Programing pg. Details are on page 79. The tape number will be assigned and appear on the screen once you eject the recorded tape.
The Tape Manager will tell you; - on which tape you find your recorded programs. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation. Delete Program Data If you want to delete a program data from the Tape Manager memory, this function is useful to increase blank space. If you do want to set up the Cable Box Controller now, follow steps 5-8on pages 51-52now. Every recording will be memorised date, start and stop time, length and channel and tapes will be given unique numbers to identify them. Programs broadcast with copyright protection technology may not record clearly.
. To set the clock manually, follow the steps on pages 14-15. Select the apppropriate mode when receiving signals via i. The 3 light on the display panel will flash during tape playback and while rewinding. Related Catalogues If you have any problems opening files please read the download.
Wait for a while and then plug the power back in. External electronic noise or interference can cause microcomputer to malfunction. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and limited viewing uses only, unless otherwise authorized by Macrovision Corporation. These messages will appear briefly every seven seconds during tape playback. Line Input mode is selected. Use a different method to set the clock. The directory screen will appear.
Entering or Editing program Editing program category title When you want to edit the program title, follow the When you want to change the program category, follow procedure below by using the Remote. You can change this number to any other number between 1 to 99. The farther the ring is rotated, the faster the search speed. Recording Each time you press the button, the front display panel shows the channel number, clock time, and the recording speed in sequence. Details are on page 5. Refer to the chart below for the solution.